Subnet Mask - Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast User Manual

For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Digital Projection Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast
Setup menu, Network continued

Subnet Mask

• Press and to select Subnet
Press to open the Subnet control box.
Press and to select from:
Automatic
or one of the following:
Class C Masks
255.255.255.254
255.255.255.252
255.255.255.248
255.255.255.240
255.255.255.224
255.255.255.192
255.255.255.128
255.255.255.0 (selected when setting is Automatic and IP class is C )
Class B Masks
255.255.254.0
255.255.252.0
255.255.248.0
255.255.240.0
255.255.224.0
255.255.192.0
255.255.128.0
255.255.0.0 (selected when setting is Automatic and IP class is B)
Class A Masks
255.254.0.0
255.252.0.0
255.248.0.0
255.240.0.0
255.224.0.0
255.192.0.0
255.128.0.0
255.0.0.0 (selected when setting is Automatic and IP class is A)
Use and to select from
Apply
Press to apply the new Subnet Mask.
or Cancel
Press or to exit without making the change.
Rev A August 2009 Rev A August 2009
User Manual User Manual 4. Controlling the projector 4. Controlling the projector
Subnet cannot be changed if
DHCP is set to ON.
DHCP will set the the subnet
mask, which will be displayed
for information only.
Notes
Page 4.47 Page 4.47