Controlling The Projector; Overview - Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast User Manual

For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Digital Projection Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast

Overview

Controlling the projector

The projector can be controlled from:
• the remote control
• the keypad
• the RS232 input
• the Ethernet input
For more information about controlling the projector using the RS232 and
Ethernet inputs, see Remote communications protocol in section 7.
Appendix.
For information about how to connect the projector, see Connecting the
projector in section 2. Installation, and Connections in section 7. Appendix.
• Many features are controlled from the menus using the menu navigation keys on
the remote control or keypad.
For more information about using the menus, see later in this section, Using the
menus.
• Some of the menu features, for example brightness, contrast and input preset
operations, can be accessed directly using the control keys at the bottom of the
remote control.
• Other features, eg zoom and focus, are controlled using the control keys at the
top of the remote control and keypad.
For more information about using the control keys, see later in this section,
Using the control keys.
Rev A August 2009 Rev A August 2009
User Manual User Manual 4. Controlling the projector 4. Controlling the projector
Notes
Menu navigation keys
Control keys
Page 4.5 Page 4.5