Save Presets - Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast User Manual

For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Digital Projection Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast
Input menu continued

Save presets

• Press and to select Save Preset.
Press to open the Save Presets A ~ H submenu.
• To save the current set of parameters, press
Presets.
For Presets J to S, select Save Preset J ~ S then press
J~S submenu. Press
Press to confirm your selection.
If this Preset has been used before, but only if the Input source has been
changed, then the following message will be displayed.
Press and to select either OK or Cancel.
Press to confirm your selection.
The parameters will be saved to the selected preset, and the following message
will be displayed.
Rev A August 2009 Rev A August 2009
and
and to select the Preset.
User Manual User Manual
to select one of the
to open the
4. Controlling the projector 4. Controlling the projector
Notes
Some menu controls can be
accessed directly using the
control keys (see earlier in this
section).
Input Menu
Presets
Save Presets A ~ H
Page 4.21 Page 4.21