Adjusting The Lens; Adjusting The Image; Orientation; Geometry - Digital Projection E-Vision Laser 15000 Series Installation & Quick Start Manual

Adjusting the lens

You can use the following options to adjust the lens:
Control panel. See Control panel on page 27
l
Remote control. See Remote control on page 29
l
On screen display (OSD). See Lens menu on page 54
l

Adjusting the image

Orientation

This can be set from the Setup menu. See Setup on page 88 for guidance.
Highlight Orientation and choose from Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling and Auto-front.

Geometry

Settings such as Keystone, Rotation, Pincushion / Barrel and Arc can be set from the Geometry menu. See Geometry on page 63 for guidance.

Picture

Settings such as Gamma, Brightness, Contrast, Saturation, Hue and Sharpness can be set from the Image menu. See Image on page 56 for guidance.
Installation & QuickStart Guide
Operating the projector Digital Projection E-Vision Laser 15000 Series
Notes
Rev B April 2021
page 35