Show Page; On / Off; Shutter Open / Closed; Freeze / Un-Freeze - Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast User Manual

For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Digital Projection Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast

Show page

The Show page is the first to display when the browser connects to the projector.
• To return to the Show page at any time, click on Show.

On / Off

• Click On to switch the projector On.
• Click Off to switch the projector into Standby mode.

Shutter Open / Closed

Click on Shutter O to open the shutter.
•
• Click on Shutter C to close the shutter.

Freeze / Un-Freeze

• Click on Freeze to freeze the display on the current frame.
• Click on Un-Freeze to un-freeze the display.

Picture sliders

• Use the sliders to adjust the Brightness, Contrast, Saturation, Hue and
Sharpness of the display.
• Click on the number above the slider to return to the default value.
Rev A August 2009 Rev A August 2009
User Manual User Manual
Picture
sliders
5. Userware 5. Userware
Notes
Page 5.5 Page 5.5