1. Manuals
  2. Brands
  3. Digital Projection Manuals
  4. Projector
  5. TITAN sx+ 3D
  6. User manual

Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast User Manual

High brightness digital video projector 4:3 display
Hide thumbs Also See for TITAN sx+ 3D Dual 3D Ultra Contrast:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
TITAN sx+ 3D, Dual 3D,
TITAN sx+ 3D, Dual 3D Ultra Contrast
High Brightness Digital Video Projector
4:3 display
User Manual
Rev A August 2009
109-798A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TITAN sx+ 3D Dual 3D Ultra Contrast and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast

Summary of Contents for Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast

  • Page 1 TITAN sx+ 3D, Dual 3D, TITAN sx+ 3D, Dual 3D Ultra Contrast High Brightness Digital Video Projector 4:3 display User Manual Rev A August 2009 109-798A...
  • Page 2 Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast...

  • Page 3: Declaration Of Conformity

    TITAN sx+ 3D January 2009 TITAN sx+ Dual 3D January 2009 TITAN sx+ 3D Ultra Contrast January 2009 TITAN sx+ Dual 3D Ultra Contrast Basis on which Conformity is being declared The products identified above comply with the protection requirements of the above EU directives, and the manufacturer has applied the following standards.
  • Page 4 Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast...

  • Page 5: Important Information

    Product revision • Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features without prior notice. Projectors built prior to this revision of the User Manual may therefore not include all the features described.

  • Page 6: General Precautions

    There are no user-serviceable parts inside the lamp module. The whole module should be replaced. Only lamps supplied by Digital Projection and intended for this projector should be used. Fitting any other lamp could damage both projector and lamp, and will invalidate the warranty.

  • Page 7: Installation Precautions

    Digital Projection User Manual Important Information TITAN sx+ 3D, Dual 3D, Ultra Contrast Installation precautions Notes Connect the LAN cable only to a computer LAN connection. Other similar connectors may have a dangerously high voltage source. The projector must be installed only by suitably qualified personnel, in accordance with local building codes.

  • Page 8: Operation And Configuration Precautions

    Electronic Equipment. Our products are designed with reuse, recycling and recovery of all components in mind. To this end, at end of life, your projector may be returned to Digital Projection Ltd or its agent so that the environmental impact can be minimised.

  • Page 9: Digital Projection Contact Details

    Digital Projection User Manual Important Information TITAN sx+ 3D, Dual 3D, Ultra Contrast Digital Projection Contact details Notes Digital Projection Limited, Greenside Way, Middleton, Manchester M24 1XX, UK. Registered in England No. 2207264, Registered Office: as above +44 (0) 161 947 3300...
  • Page 10 Important Information Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Page x Rev A August 2009...

  • Page 11: Table Of Contents

    Titan sx+ 3D, Dual 3D, 3D Ultra Contrast, Dual 3D Ultra Contrast Contents Declaration of Conformity ........................iii Important Information Symbols used in this guide ........................v ..............................v Warnings ............................v Trademarks Product revision ............................v Manual revision ............................v General precautions ..........................vi Installation precautions ........................
  • Page 12 Table of Contents Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Mounting the projector ........................2.12 ......................... 2.12 Chassis adjustment ....................... 2.12 Fitting the optional rigging frame Stacking projectors .......................... 2.14 Connecting the projector ........................ 2.15 ..........................2.15 Signal Inputs ........................

  • Page 13: Using The Control Keys

    Digital Projection User Manual Table of Contents TITAN sx+ 3D, Dual 3D, Ultra Contrast Using the control keys ........................4.11 .............................4.11 Power ............................4.11 Shutter ...........................4.11 On-Screen-Display .............................4.11 Focus ..............................4.11 Zoom ..............................4.11 Shift ........................4.12 Auto-detect input mode .......................... 4.12 Source information ..............................
  • Page 14 Table of Contents Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Geometry menu ..........................4.26 .......................... 4.26 Horizontal Position ..........................4.26 Vertical Position ........................... 4.26 Aspect Ratio ......................4.27 User Horizontal Aspect Ratio ....................... 4.27 User Vertical Aspect Ratio ............................

  • Page 15: Show Page

    Digital Projection User Manual Table of Contents TITAN sx+ 3D, Dual 3D, Ultra Contrast 5. Userware Introduction ............................5.3 ........................... 5.3 Applet version ........................... 5.4 Standalone version Show page ............................5.5 ............................5.5 On / Off ........................5.5 Shutter Open / Closed ...........................
  • Page 16 Table of Contents Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast 3D page ............................... 5.18 ............................5.18 3D Enable .......................... 5.18 Frame Dominance ..........................5.18 3D Sync Source ............................5.18 Dark Time ............................. 5.18 Sync Delay Global Colour page ..........................
  • Page 17 Digital Projection User Manual Table of Contents TITAN sx+ 3D, Dual 3D, Ultra Contrast 7. Appendix Troubleshooting ..........................7.2 Specifications ............................7.4 ............................ 7.4 Part numbers ............................. 7.4 Optical ............................7.5 Electrical ............................7.5 Physical ............................7.6 Lens Data Dimensions ............................
  • Page 18 Table of Contents Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Page xviii Rev A August 2009...

  • Page 19: Introduction

    1. Introduction Contents What’s in the box? ..........................1.2 Key features of the projector ......................1.3 Getting to know the projector ......................1.4 ......................1.4 Front panel, – lens and power ......................1.4 Rear panel – lamp and air filter ....................

  • Page 20: What's In The Box

    1. Introduction Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast What’s in the box? Notes • Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Lenses are optional. Order lenses from your Digital •...

  • Page 21: Key Features Of The Projector

    TITAN sx+ 3D, Dual 3D, Ultra Contrast Key features of the projector Notes Congratulations on your purchase of the Digital Projection Titan sx+-3D/FastFrame projector. Digital Projection International, Texas Instruments’ first DLP™ partner and the original innovator of the 3-chip DLP™ projector, proudly introduces the Titan sx+.

  • Page 22: Getting To Know The Projector

    1. Introduction Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Getting to know the projector Notes Front panel, – lens and power For more detailed information Air inlet - about lenses, see around lens section 2. Installation...

  • Page 23: Side Panel - Connection And Control

    Digital Projection User Manual 1. Introduction TITAN sx+ 3D, Dual 3D, Ultra Contrast Side panel – connection and control Notes For information about how to connect the projector, see Connecting the projector in section 2. Installation, and Control panel Connections in section 7.
  • Page 24 1. Introduction Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Page 1.6 Rev A August 2009...

  • Page 25: Screen Requirements

    2. Installation Contents Screen requirements ......................... 2.2 ............................2.2 Aspect ratio ......................2.2 Fitting the image to the DMD ....................... 2.2 Images displayed full width ......................2.2 Images displayed full height ........................2.3 Diagonal screen sizes ......................2.4 Fitting the image to the screen ....................

  • Page 26: Aspect Ratio

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Screen requirements Notes Aspect ratio The images are shown here scaled automatically by the Fitting the image to the DMD projector. If the source image supplied to the projector is smaller than 1400 x 1050 pixels, then the image will not fill the DMD.

  • Page 27: Diagonal Screen Sizes

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Diagonal screen sizes Notes Screen sizes are sometimes specified by their diagonal size (D) in inches. When dealing with large screens and projection distances at different aspect ratios, it is more convenient to measure screen width (W) and height (H).
  • Page 28 2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Fitting the image to the screen Notes It is important that your screen is of sufficient height and width to display images at all the aspect ratios you are planning to use.

  • Page 29: Positioning The Screen And Projector

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Positioning the screen and projector Notes For optimum viewing, the screen should be a flat surface perpendicular to the floor. The bottom of the screen should be 1.2m (4 feet) above the floor and the front row The projector should be of the audience should not have to look up more than 30°...

  • Page 30: Choosing A Lens

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Choosing a lens Notes A number of lenses are available for use with the projector. Which lens you choose will depend on the screen size, image aspect ratio, projection distance and light The High Brightness lenses are output.

  • Page 31: Choosing A Lens Using The Lens Charts

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Choosing a lens using the lens charts Notes Use the chart below to choose which lens best suits your application. Example • For a screen width of 12m at a distance of 35m, the 2.77 - 4.51: 1 zoom lens would be best suited.

  • Page 32: Choosing A Lens By Calculation

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Choosing a lens by calculation Notes For any screen size not listed above, or if you need to be more precise, then use the calculations below. The Throw ratio for a particular •...

  • Page 33: Useful Lens Calculations

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Useful lens calculations Notes The Throw ratio for a particular The following lens calculations may be useful: lens is fixed, but assumes that the image fills the width of the DMD.

  • Page 34: Fitting The Lens

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Fitting the lens Notes • Turn the lens release lever anti-clockwise so that it is pointing upwards, to open Each time a new lens is the lock.

  • Page 35: Shifting The Image

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Shifting the image Notes For more information on using The normal position for the projector is at the centre of the screen. However, you the Lens shift feature, see can set the projector above or below the centre, or to one side, and adjust the image section 4.

  • Page 36: Mounting The Projector

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Mounting the projector Notes The projector is designed to be used on a flat surface, but the optional rigging frame BEFORE INSTALLING THE will allow it to be suspended from a lighting truss or rigging. The four adjustable feet...

  • Page 37: Adjusting The Rigging Frame

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Adjusting the rigging frame Notes Coarse adjustment of projector level should be made by adjusting the length of the supporting wires or chains, or by adjusting the position of the truss or rigging.

  • Page 38: Stacking Projectors

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Stacking projectors Notes The rigging frame is capable of supporting the weight of up to two other projectors, using the built-in frame couplings. The projectors can be stacked on top of each other, or suspended below each other.

  • Page 39: Connecting The Projector

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Connecting the projector Notes Control Front Input Rear Input connection panel connection panel connection panel Signal Inputs The following inputs are available: 3. DVI 4. SDI 2. RGB2 1.

  • Page 40: Input Format, Dvi Input 3

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Input format, DVI input 3 Notes Single DVI-D Sources upto 1400x1050 resolution; 24- 60Hz; 8bits per colour. For important information about Input formats, DVI input 8 how to control the projector...

  • Page 41: Dvi Input Connection Examples

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast DVI Input connection examples Notes Projector Input 3 Single DVI video source Input 8 MAIN Single or Dual DVI video source Dual DVI: high bandwidth/frame rate Projector...

  • Page 42: 3D Connection Examples

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast 3D connection examples Notes 3D sources up to 60Hz, requiring frame doubling and left/right interleaving Projector Video Inputs 1-7 Sync in Sync 3D server Sync Z screen or...

  • Page 43: Control Connection Examples

    Digital Projection User Manual 2. Installation TITAN sx+ 3D, Dual 3D, Ultra Contrast Control connection examples Notes LAN connection All of the projector’s features can be controlled via a LAN connection, using a For more information about pin standard internet browser package such as Internet Explorer.

  • Page 44: Power Connection

    2. Installation Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Power connection Notes When mains power is first applied, the projector will perform a self-test, then go into Standby mode. The Power indicator on the control panel will show amber until the POWER Use only the power cable on the remote control or the keypad, is pressed for 3 seconds.

  • Page 45: Getting Started

    3. Getting Started Contents Switching the projector on ....................... 3.2 Selecting an input or test pattern ....................3.2 ..............................3.2 Input ............................3.2 Test pattern Adjusting the lens ..........................3.3 .............................. 3.3 Focus ............................... 3.3 Zoom ..............................3.3 Shift Adjusting the projected image ......................

  • Page 46: Switching The Projector On

    3. Getting Started Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Switching the projector on Notes • Connect the power cable between the mains supply and the projector. For more information about connecting the power cable, see Power Connections, in section 2.

  • Page 47: Adjusting The Lens

    Digital Projection User Manual 3. Getting Started TITAN sx+ 3D, Dual 3D, Ultra Contrast Adjusting the lens Notes Focus Each time a new lens is fitted to the projector, the calibration procedure • Press followed by to adjust the focus. must be carried out. See Setup menu, in Section 4.

  • Page 48: Adjusting The Projected Image

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 3. Getting Started 3. Getting Started Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Adjusting the projected image Notes Picture settings • Press a...
  • Page 49 4. Controlling the projector Contents Overview ............................... 4.5 ........................4.5 Controlling the projector ........................4.6 Input modes and settings ........................4.6 Input mode detection ......................4.6 Mode library and mode history ..........................4.7 Input presets Indicators .............................. 4.8 ........................4.8 Input status indicators The control panel ..........................

  • Page 50: Using The Menus

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Using the menus ..........................4.16 ..................... 4.16 Navigating menus and submenus ..........................

  • Page 51: Setup Menu

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu ............................4.33 ............................4.34 Projector ..........................4.34 Orientation ........................

  • Page 52: Differences Between Input 8 And Inputs

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast ..............................4.50 ........................... 4.50 3D Enable ........................... 4.50 Dark Time ........................

  • Page 53: Controlling The Projector

    Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Overview Notes Controlling the projector The projector can be controlled from: •...

  • Page 54: Input Modes And Settings

    4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Input modes and settings Notes Input mode detection The projector can automatically detect the following parameters from the incoming...

  • Page 55: Input Presets

    User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Any subsequent changes that you make to the modal settings will be saved in the Notes mode history, with the input mode.

  • Page 56: Indicators

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Indicators Notes Input status indicators 1. RGB1 4. SDI 3.

  • Page 57: The Control Panel

    Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast The control panel Notes Many features are controlled Keypad layout...

  • Page 58: The Remote Control

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast The remote control Notes Many features are controlled Layout from the menus using the menu navigation keys on the remote control or keypad.

  • Page 59: Using The Control Keys

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Using the control keys Notes Power • Press POWER and hold for 3 seconds, to switch the projector ON.

  • Page 60: Auto-Detect Input Mode

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Auto-detect input mode Notes • Press to force the projector to re-detect the input mode For more information about (see Input modes and settings, earlier in this section).

  • Page 61: Input Presets

    Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Input Presets Notes recall • To recall a set of modal and lens settings that have been saved, press and hold , whilst pressing the lettered key A –...

  • Page 62: Red, Green And Blue

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Red, Green and Blue Notes • Press to switch the red, green or blue components OFF The red, green and blue keys or ON.

  • Page 63: Magnify And Pan

    Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Magnify and pan Notes The magnify feature utilises a •...

  • Page 64: Using The Menus

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Using the menus Notes Some menu controls can be Navigating menus and submenus...
  • Page 65 Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Notes • Press to open the menu. The blue highlight moves to the first item in the menu, which may be submenu, for example the Projector Setup submenu.

  • Page 66: Menu Controls

    4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Menu controls Notes Some menus have controls, as shown in the examples below. Some menus items may be...

  • Page 67: Input Menu

    Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Input menu Notes Some menu controls can be accessed directly using the To return to the main menu, press up to three times.

  • Page 68: Presets

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Input menu continued Notes Presets Some menu controls can be accessed directly using the Sixteen sets of parameters can be saved and recalled (A –...

  • Page 69: Save Presets

    Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Input menu continued Notes Save presets Some menu controls can be accessed directly using the •...

  • Page 70: Delete Presets

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Input menu continued Notes Delete presets • Press to select Delete Preset.

  • Page 71: Picture Menu

    Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Picture menu Notes Some menu controls can be accessed directly using the To return to the main menu, press up to three times.

  • Page 72: Gamma Correction

    4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast picture menu continued Notes Gamma Correction Video recordings are often supplied with a gamma adjustment applied. The projector’s gamma adjustment can be used to correct for this.

  • Page 73: Aspect Ratio

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast picture menu continued Notes Aspect Ratio • Press to select Aspect Ratio.

  • Page 74: Geometry Menu

    4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Geometry menu Notes Some menu controls can be accessed directly using the To return to the main menu, press up to three times.

  • Page 75: User Horizontal Aspect Ratio

    Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Geometry menu continued Notes User Horizontal Aspect Ratio • Press to select User H Aspect.

  • Page 76: Resolution

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Geometry menu continued Notes Resolution • Press to select Resolution.

  • Page 77: Blanking

    Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Geometry menu continued Notes When Input Detection is set to Custom: •...

  • Page 78: Colour Menu

    4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Colour menu Notes To return to the main menu, press up to three times.

  • Page 79: Colour Mode

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Colour menu continued Notes Colour Mode • Press to select Colour Mode.

  • Page 80: Trim

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Colour menu continued Notes Trim • Press to select Trim.

  • Page 81: Setup Menu

    Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu Notes To return to the main menu, press up to three times.

  • Page 82: Projector

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, continued Notes Projector • Press to select Projector.

  • Page 83: Keystone

    Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, projector continued Notes Keystone Used to correct for distortion caused by the projector being mounted higher or lower than the screen.

  • Page 84: Test Pattern

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, projector continued Notes Test pattern • Press to select Test Pattern.

  • Page 85: Fastframe

    Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, projector continued Notes FastFrame Used to reduce the artifacts and image blur typically associated with rapidly moving images, by increasing the time the display is blanked between frames (dark time).

  • Page 86: Global Colourimetry

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu continued Notes Global Colourimetry • Press to select Global Colourimetry.

  • Page 87: Colour Mode

    Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, Global Colourimetry continued Notes Colour Mode • Press to select Colour Mode.

  • Page 88: Lamp

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, continued Notes Lamp • Press to select Lamp.

  • Page 89: Lamp Power

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, Lamp continued Notes Lamp power • Press to select the Lamp Power setting.

  • Page 90: On Screen Display

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu continued Notes On Screen Display • Press to select On Screen Display.

  • Page 91: Password

    Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu continued Notes Password Entry to the password protected area is available to authorised service personel only.

  • Page 92: Communication

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu continued Notes Communication • Press to select Comunication.

  • Page 93: Network

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu continued Notes Network • Press to select Network.

  • Page 94: Dhcp

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, Network continued Notes DHCp • Press...

  • Page 95: Subnet Mask

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, Network continued Notes Subnet Mask • Press...

  • Page 96: Gateway Mask

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, Network continued Notes Gateway Mask • Press...

  • Page 97: Wifi Channel

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, Network continued Notes Wifi Channel • Press to select Wifi Channel.

  • Page 98: 3D Enable

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, continued Notes • Press to select 3D.
  • Page 99 Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, 3D continued Notes Frame Dominance Set the frame dominance to suit the incoming 3D video frame sequence.

  • Page 100: Sync Source

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 4. Controlling the projector 4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, 3D continued Notes Sync Source • Press...

  • Page 101: Restore Defaults

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Setup menu, continued Notes Restore Defaults • Press to select Restore Defaults.

  • Page 102: Information Menu

    4. Controlling the projector Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Information menu Notes To return to the main menu, press up to three times.

  • Page 103: Digital Projection Information

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 4. Controlling the projector 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Information menu continued Notes Digital Projection Information • Press to select Digital Projection.

  • Page 104: Controlling The Projector When Input 8 Is Being Used

    4. Controlling the projector Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Controlling the projector when Input 8 is being Notes used Differences between Input 8 and Inputs 1-7 Input 8 has been designed to offer the user access to a very high bandwidth digital video path, free of the limitations inherent to standard image processing techniques.

  • Page 105: Setting Up Input 8 Using The Userware

    Digital Projection User Manual 4. Controlling the projector TITAN sx+ 3D, Dual 3D, Ultra Contrast Notes Setting up Input 8 using the Userware It is recommended that when Input 8 is being used, the projector is controlled from a personal computer via a LAN connection, using the Userware Applet as described in the next section.
  • Page 106 4. Controlling the projector Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Page 4.58 Rev A August 2009...

  • Page 107: Screen Page

    5. Userware Contents Introduction ............................5.3 ........................... 5.3 Applet version ............................ 5.3 Disconnect ............................. 5.3 Reconnect ........................... 5.4 Standalone version ............................ 5.4 Disconnect ............................. 5.4 Reconnect Show page ............................5.5 ............................5.5 On / Off ........................5.5 Shutter Open / Closed ...........................
  • Page 108 For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast MCGD page ............................5.14 ....................5.14 The MCGD measurement procedure ..........................5.15 MCGD values ............................

  • Page 109: Userware

    There are two versions of the Userware: the Applet version, stored on the projector software must be installed on and the Standalone version, supplied on disk or from the Digital Projection website. your browser. This software can be downloaded, free of charge Applet version from www.java.com.

  • Page 110: Standalone Version

    Notes • To install the Userware, simply copy the file (from the CD, or downloaded from the Digital Projection website), to a folder on the computer. To use the Titan Userware the • Double click on the filename to start the software.

  • Page 111: Show Page

    User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Show page Notes The Show page is the first to display when the browser connects to the projector.

  • Page 112: Input Presets

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Show page continued Notes Input Presets For more information about recall...

  • Page 113: Orientation

    Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Show page continued Notes Orientation Click on Orientation to select one of the following from the drop down menu: •...

  • Page 114: Test Pattern

    5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Show page continued Notes Test Pattern • Click on Test Pattern to select from the drop down menu:...

  • Page 115: Lens Page

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Lens page Notes To see the Lens page, click on Lens. • Lens...

  • Page 116: Image Page

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Image page Notes To see the Image page, click on Image. • Component •...

  • Page 117: Colour Space

    Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Image page continued Notes Colour Space • Click on Colour Space to select one of the following from the drop down menu:...

  • Page 118: Gamma

    5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Image page continued Notes Gamma • Click on Gamma Correction to select from the drop down menu:...

  • Page 119: Screen Page

    Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Screen page Notes To see the Screen page, click on Screen. • The blanking curtains will not...

  • Page 120: Mcgd Page

    Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast MCGD page Notes MCGD - Measured Colour Gamut Data - can be used to correct for a number of...

  • Page 121: Mcgd Values

    Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast MCGD page continued Notes • To see the MCGD page, click on MCGD .

  • Page 122: Tcgd Page

    Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast TCGD page Notes TCGD - Target Colour Gamut Data - can be used to match the display to a pre-...

  • Page 123: Update Graph

    Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast TCGD page continued Notes Update Graph • Click on Update Graph to show the effects of the new color gamut graphically.

  • Page 124: 3D Enable

    5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast 3D page Notes To see the 3D page, click on 3D. • For more information about the 3D settings, see Seup menu, 3D, in section 4.

  • Page 125: Global Colour Page

    Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Global Colour page Notes To see the Global page, click on Global. • The Global page will not be...

  • Page 126: Modal Colour Page

    5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Modal Colour page Notes To see the Modal Colour page, click on Modal. •...

  • Page 127: Lift And Gain Sliders

    Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Modal Colour page continued Notes Lift and Gain sliders Use the sliders to adjust the Lift and Gain for Red, Green and Blue individually.

  • Page 128: Information Page

    Click on Projector Information to see the following information about the projector and the Userware: Digital Projection • Click on Digital Projection to see the following contact information: Page 5.22 Page 5.22 Rev A August 2009 Rev A August 2009...

  • Page 129: Fastframe Page

    Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast FastFrame page Notes To see the FastFrame page, click on F-Frame. • For more information about the...

  • Page 130: System Page

    For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4. 5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast System page Notes To see the System page, click on System. • •...

  • Page 131: Discover Page

    Digital Projection Digital Projection User Manual User Manual 5. Userware 5. Userware TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Discover page Notes To see the Discover page, click on Discover. • If the projector that launched the Userware is still connected, then its LAN IP address will be listed in the panel and marked Online.

  • Page 132: Refresh

    5. Userware 5. Userware Digital Projection Digital Projection User Manual User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast Refresh Notes • Click on Refresh to search the network for other projectors. Any projectors previously connected, that are now no longer online, will be marked Unreachable.

  • Page 133: Cleaning

    6. Maintenance Contents Changing the lamp module ......................6.2 Changing the air filter ........................6.3 Cleaning ..............................6.4 ............................6.4 Projector ..............................6.4 Lens ........................... 6.4 Lamp module Rev A August 2009 Page 6.1...

  • Page 134: Changing The Lamp Module

    6. Maintenance Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Changing the lamp module Notes • Turn the power OFF and allow the lamp to cool for 5 minutes. Always allow the lamp to cool for 5 minutes before: •...
  • Page 135 Digital Projection User Manual 6. Maintenance TITAN sx+ 3D, Dual 3D, Ultra Contrast Changing the air filter Notes • Turn the power OFF and allow the lamp to cool for 5 minutes. Always allow the lamp to cool for 5 minutes before: •...

  • Page 136: Lamp Module

    6. Maintenance Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Cleaning Notes Turn the projector off before cleaning. Projector Never use strong detergents or solvents such as alcohol Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild or thinners to clean the detergent.
  • Page 137 7. Appendix Contents Troubleshooting ..........................7.2 Specifications ............................7.4 ............................ 7.4 Part numbers ............................. 7.4 Optical ............................7.5 Electrical ............................7.5 Physical ............................7.6 Lens Data Dimensions ............................7.8 Input modes supported ........................7.9 Input connections ..........................7.10 ..........................7.10 1.

  • Page 138: Appendix

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Troubleshooting problem possible solutions The projector will not power up. Check that the mains plug is plugged in and that the mains supply is switched on. Check any external fuses or breakers.
  • Page 139 Check that the address setting on the remote control is set either to zero, or to the same as the projector. See section 4. Controlling the projector, Communication menu In the event that this troubleshooting guide has not solved the problem, then contact your Digital Projection dealer or service centre. Rev A August 2009 Page 7.3...

  • Page 140: Specifications

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Specifications Part numbers Projector sx+ 3D 109-340 sx+ 3D Ultra Contrast 109-341 sx+ Dual 3D 109-334 sx+ Dual 3D Ultra Contrast 109-335 Rigging frame 107-956 Power cable 10A, Europe...

  • Page 141: Electrical

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast Brightness sx+ 3D 4500 ANSI lumens ±10% sx+ 3D Ultra Contrast 2500 ANSI lumens ±10% sx+ Dual 3D 9000 ANSI lumens ±10% in dual lamp mode sx+ Dual 3D Ultra Contrast 4500 ANSI lumens ±10% in dual lamp mode...

  • Page 142: Lens Data

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Lens Data Optical 105-607 ~ 107-195 105-608 105-609 109-236 ~ 109-359 105-610 ~ 107-196 throw ratio 0.73 : 1 fixed 1.2 : 1 fixed 1.2 : 1 fixed 1.26 - 1.61 : 1 zoom 1.5 - 2.02 : 1 zoom full DMD image width 0.73 : 1...
  • Page 143 Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast Optical 105-611 ~ 107-197 105-612 ~ 107-198 105-613 ~ 107-199 109-235 ~ 109-358 2.02 - 2.77 : 1 zoom 2.77 - 4.51 : 1 zoom 4.51 - 7.53 : 1 zoom 7.5 - 11.2 : 1 zoom...

  • Page 144: Dimensions

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Dimensions All dimensions in mm unless otherwise stated Page 7.8 Rev A August 2009...

  • Page 145: Input Modes Supported

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast Input modes supported RGB colourspace only Signal Resolution Refresh Total Horizontal Rate number Frequency ( Hz ) of lines (kHz) SDTV 480i 720 x 480 15.73 ü...

  • Page 146: Input Connections

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Input connections Notes 1. RGB1 input 5 x 75 ohm BNC Used for computer, progressive video and analog HD video. RGsB RGBS RGBHV YPrPb To select the sync format for...

  • Page 147: Dvi-D Single Input

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast 3. DVI-D Single input Notes 24 way D-type connector TMDS Data 2- pin view of female connector TMDS Data 2+ TMDS Data 2 Shield unused unused DDC Clock...

  • Page 148: Sdi Input

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast 4. SDI input Notes 1 x 75 ohm BNC SMPTE 292 / HD-SDI signals are very high speed digital signals which require better quality coaxial cable than conventional analogue video. The data rate is 1.5 Gigabits per second.

  • Page 149: Dvi-D Single/Dual/Twin Input

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast 8. DVI-D Single/Dual/Twin input Notes 24 way D-type connector TMDS Data 2- For important information about pin view of female connector how to control the projector TMDS Data 2+...

  • Page 150: Control Connections

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Control connections Notes Wired Remote control connection Note that plugging in the remote 3.5mm mini jack Sleeve control cable will disable the infra-red. Power Ring Signal Sleeve Ground...

  • Page 151: 3D Sync

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast 3D sync Notes unused Sync OUT 3D Sync OUT is switched pin view of female connector between 0V and 3.3V unused unused unused Sync IN Serial control input...

  • Page 152: Remote Communications Protocol

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Remote communications protocol Notes Version: Revision C 02/01/07 Details of how to connect to the projector, using the serial Introduction control input or via a LAN, can This protocol document covers all projectors in the Titan series and also the be found earlier in this section.

  • Page 153: Operation Messages

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast Operation Messages Operation messages are constructed using the following format: Header Type Size Oper’n Operation Reserved type 2 bytes 1 byte 2 bytes 2 bytes 1 byte...

  • Page 154: Enhanced Messages

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Enhanced Messages Enhanced messages are constructed using the following format: Header Type Size Data type Data length (n) 2 bytes 1 byte 2 bytes 2 bytes 2 bytes...

  • Page 155: Operation Command Examples

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast Operation Command examples Notes All operation commands are located at bytes 9 &10. All values are located at bytes 17 & 18 unless otherwise indicated Spaces in example messages...

  • Page 156: Source (3702)

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Source (3702) Notes projector source select Value Spaces in example messages are for visual clarity and should RGB1 not be sent as part of the message. RGB2 In the example messages the CRC is set to 5858h.

  • Page 157: Brightness (E502)

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast Brightness (E502) Notes Adjusts Brightness -128 — +127 (00h - FFh) Range: Spaces in example messages are for visual clarity and should Centre (0): 128 (80h) not be sent as part of the message.

  • Page 158: Contrast (E602)

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Contrast (E602) Notes Adjusts Contrast -128 — +127 (00h - FFh) Range: Spaces in example messages are for visual clarity and should Centre (0): 128 (80h) not be sent as part of the message.

  • Page 159: Shutter (Cf02)

    Digital Projection User Manual 7. Appendix TITAN sx+ 3D, Dual 3D, Ultra Contrast Shutter (CF02) Notes Closes and opens shutter Target Value Spaces in example messages (Set) (Get) are for visual clarity and should not be sent as part of the Shutter Close message.

  • Page 160: Quick Reference Chart

    7. Appendix Digital Projection User Manual TITAN sx+ 3D, Dual 3D, Ultra Contrast Quick Reference chart Page 7.24 Rev A August 2009...

Table of Contents