Adjusting The Lens; Adjusting The Image - Digital Projection M-Vision 18K Series Installation And Quick Start Manual

Digital Projection M-Vision Laser 18K Series

Adjusting the lens

Lens
The lens can be adjusted using the
Lens menu
The Lens menu provides access to the
Lens Control Zoom Focus
allows , and
Shift Adjustment
mode.
ENTER/SELECT
Press to switch between the two modes.
Remote control
Use the remote control to adjust zoom, focus and shift directly, without opening a menu:
•
OK
enters lens control, then switches between
•
EXIT
exits lens control and opens the
•
MENU
exits lens control and returns to the main image.
•
The arrow buttons adjust zoom, focus and shift as indicated on the screen.

Adjusting the image

Orientation
•
This can be set from the Setup menu.
Orientation
Highlight and choose from
Geometry
•
Settings such as Keystone, Rotation, Pincushion / Barrel and Arc can be set from the Geometry menu.
Picture
•
Settings such as Gamma, Brightness
Installation and Quick-Start Guide
menu, or using the lens buttons on the remote control.
Lens Control setting and the Lens Center
Shift
adjustment using the arrow buttons. The setting operates in
Zoom/Focus Adjustment
Lens
menu.
Front Tabletop Front Ceiling
, ,
Contrast Saturation Hue and Sharpness can be set from the Image menu.
, ,
,
OPERATING THE PROJECTOR
command.
Zoom/Focus Adjustment
Shift Adjustment
and .
Rear Tabletop, Rear Ceiling Auto-front
and
and
For full details of how to adjust
the lens using the remote control,
see Remote Control
guide.
Setup menu
.
Geometry menu
Image menu
Notes
earlier in this
Rev D October 2019
page 21