Set Wet Activation; Set Units - Aeris Manta Operating Manual

54
SET WET ACTIVATIO , information includes (Fig. 48):
> Graphic WET
> Set Point graphic ON (or OFF) flashing.
 Pressing and releasing the S button will toggle between
ON and OFF.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
UNITS screen with the Set Point flashing.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET U screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET U
screen.
 Depressing and holding the button for 2 seconds or if
no button is pressed for a period of 2 minutes operation
will revert to the NOR or GAUG SURF AIN screen.
SET U ITS, information includes (Fig. 48):
> Graphic UNIT
> Set Point, FT icon and F graphic (or icon and C
graphic) flashing, with degrees icon.
 Pressing and releasing the S button will toggle between
Imperial (FT, F) and etric ( , C).