Set Daily Alarm; Minute Set - Aeris Epic Operating Manual

3
 If no button is pressed during a period of 2 minutes, the unit
will revert to the Local Default Watch Time screen.

SET DAILY ALARM

> Alarm icon
> Graphics ALRM and S t.
> Alarm Time previously set (hr:min) with the HOUR Set Point
flashing.
 Depressing and holding the S button while the
Point is flashing will scroll through the Set Points in 1 hour
increments at a rate of 4 per second from 12: Am to 11:
Pm (or 0: to 23: if 24 hour format). The graphic Am or Pm
will be displayed when setting Time in 12 Hour Format.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the HOUR Set Point and/or advance to
S T MINUT with the Set Point flashing.
 Depressing and holding the S button while the
Point is flashing will scroll through the Set Points in 1 minute
increments at a rate of 4 per second from :00 to :59.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the MINUT Set Point and/or advance
to the DAILY ALARM screen indicated by the graphic ON
(or OFF) flashing.
 Depressing and holding the M button for 2 seconds will
revert to the Local Default Watch Time screen.
, information provided includes (Fig. 24):
HOUR
Set
MINUTE
Set