Set Edt (Elapsed Dive Time) Alarm - Aeris Epic Operating Manual

SET EDT (ELAPSED DIVE TIME) ALARM

Information includes (Fig. 50):
> Graphic DT
> Symbols DIV and TIM .
> Set Point value (hr:min), flashing.
 Pressing and releasing the S button momentarily (< 2
seconds) will increase the Set Point from 0:10 to 3:00
(hours:minutes) in 5 minute (:05) increments.
 Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the S T
NIBG (Nitrogen Loading Bar Graph) ALARM screen with the
Set Point flashing.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds) will step through the other S T A
screens.
 Depressing the A and S buttons simultaneously for 2 seconds
will save the setting and revert back to the S T A screen.
 Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
FR Mode has a separate DT Alarm.
57