Air Cleaner Housing Drain Tube - Honda TRX500FM Service Manual

Clean the inside of the air cleaner housing and cover.
Make sure the rubber seal in the cover is in position and
in good condition.
Install the dust filler [1) into the housing port.
Install the element assembly [2) over the connecting
tube on the housing.
Be sure to rest the element onto the stepped area [3} of
the housing and tighten the band screw [4].
MAINTENANCE
Install the air cleaner cover [1] with the arrow [2) facing
forward by aligning the stepped area (3) with the
element.
Secure the cover wi th the four retaining clips [4].
Install the seat (page 24).
AIR CLEANER HOUSING DRAIN TUBE
NOTE '
• If the vehicle is used in very wet or muddy
conditions , more frequent inspections are required.
Remove the drain tube (1) from the bottom of the air
cleaner housing to empty any deposits.
Install the drain tube securely .
I . . .
141
3-7