Headlamp Switch; Headlamp Switch Lamp(S); Hvac Control Lamp; Instrument Cluster - Chrysler 1998 Voyager Service Manual

8E - 18 INSTRUMENT PANEL AND SYSTEMS
REMOVAL AND INSTALLATION (Continued)

HEADLAMP SWITCH

REMOVAL
(1) Remove instrument cluster bezel (Fig. 14).
Fig. 14 Headlamp Switch
(2) Remove screws holding the headlamp switch
bezel to cluster bezel.
(3) Disconnect the wire connectors from the head-
lamp switch and wire connector from the power mir-
ror switch.
(4) Remove headlamp switch bezel from cluster
bezel.
INSTALLATION
For installation, reverse the above procedures.

HEADLAMP SWITCH LAMP(S)

REMOVAL
(1) Remove instrument cluster bezel.
(2) Disconnect wire connectors.
(3) Remove headlamp switch bezel from instru-
ment cluster bezel.
(4) Rotate bulb socket counterclockwise one quar-
ter turn (Fig. 15).
(5) Pull bulb socket from headlamp switch.
INSTALLATION
For installation, reverse the above procedures.

HVAC CONTROL LAMP

REMOVAL
(1) Remove radio bezel and HVAC Control (Fig.
16).
(2) Remove rear cover from HVAC control.
(3) Rotate bulb socket counterclockwise one quar-
ter turn.
(4) Pull bulb socket from HVAC.
Fig. 15 Headlamp Switch Lamp
Fig. 16 HVAC Control Lamps
INSTALLATION
For installation, reverse the above procedures.

INSTRUMENT CLUSTER BACK PANEL

REMOVAL
(1) Remove instrument cluster.
(2) Remove screws holding back panel to instru-
ment cluster (Fig. 17).
(3) Remove back panel.
INSTALLATION
For installation, reverse the above procedures.

INSTRUMENT CLUSTER BEZEL

REMOVAL
(1) Remove steering column cover.
(2) Remove over steering column bezel (Fig. 18).
(3) Remove left end cover.
(4) Remove screw at left end of cluster bezel and
headlamp switch.
NS/GS