Ignition Switch And Lock Cylinder - Chrysler 1998 Voyager Service Manual

NS
DESCRIPTION AND OPERATION
IGNITION INTERLOCK . . . . . . . . . . . . . . . . . . . . 35
LOCK KEY CYLINDER . . . . . . . . . . . . . . . . . . . . 35
REMOVAL AND INSTALLATION
IGNITION INTERLOCK . . . . . . . . . . . . . . . . . . . . 38
DESCRIPTION AND OPERATION
IGNITION INTERLOCK
All vehicles equipped with automatic transaxles
have an interlock system. The system prevents shift-
ing the vehicle out of Park unless the ignition lock
cylinder is in the Off, Run or Start position. In addi-
tion, the operator cannot rotate the key to the lock
position unless the shifter is in the park position. On
vehicles equipped with floor shift refer to Group 21 -
Transaxle for Automatic Transmission Shifter/Igni-
tion Interlock.
LOCK KEY CYLINDER
The lock cylinder is inserted in the end of the
housing opposite the ignition switch. The ignition key
rotates the cylinder to 5 different detents (Fig. 1):
• Accessory
• Off (lock)
• Unlock
• On/Run
• Start
REMOVAL AND INSTALLATION
IGNITION SWITCH
The ignition switch attaches to the lock cylinder
housing on the end opposite the lock cylinder (Fig. 2).
For ignition switch terminal and circuit identifica-
tion, refer to Group 8W, Wiring Diagrams.

IGNITION SWITCH AND LOCK CYLINDER

INDEX
page
IGNITION SWITCH . . . . . . . . . . . . . . . . . . . . . . . 35
LOCK CYLINDER HOUSING . . . . . . . . . . . . . . . 38
LOCK KEY CYLINDER . . . . . . . . . . . . . . . . . . . . 38
Fig. 1 Ignition Lock Cylinder Detents
Fig. 2 Ignition Switch—Viewed From Below Column
IGNITION SYSTEM 8D - 35
page