Glove Box; Glove Box Lamp And Switch; Glove Box Lock Striker - Chrysler 1998 Voyager Service Manual

NS/GS
REMOVAL AND INSTALLATION (Continued)

GLOVE BOX

REMOVAL (FIG. 4)
(1) Open glove box (Fig. 10).
Fig. 10 Glove Box
(2) Disengage clip holding checkstraps to glove box
door.
(3) Pivot glove box downward and disengage hinge
hooks from instrument panel.
(4) Remove glove box.
INSTALLATION
(1) Place glove box in position.
(2) Engage hinge hooks into instrument panel and
pivot glove box upward.
(3) Engage clip to hold checkstraps to glove box
door.
(4) Close glove box door.

GLOVE BOX LAMP AND SWITCH

REMOVAL
(1) Open glove box door (Fig. 11).
(2) Using a trim stick, lightly pry glove box lamp/
switch from instrument panel.
(3) Disengage wire connector from glove box lamp
and switch.
(4) Remove glove box lamp and switch.
(5) Remove lamp (Fig. 12).
INSTALLATION
For installation, reverse the above procedures.
INSTRUMENT PANEL AND SYSTEMS
Fig. 11 Glove Box Lamp and Switch
Fig. 12 Glove Box Lamp

GLOVE BOX LOCK STRIKER

REMOVAL
(1) Open glove box door (Fig. 13).
Fig. 13 Glove Box Lock Striker
(2) Disengage clip holding checkstraps to glove box
door.
(3) Remove screws holding lock striker to instru-
ment panel.
(4) Remove glove box lock striker.
INSTALLATION
For installation, reverse the above procedures.
8E - 17