Chrysler 1998 Voyager Service Manual page 145

NS
REMOVAL AND INSTALLATION (Continued)
(23) Remove the adjuster (Fig. 154) from the lead-
ing and trailing park brake shoe.
Fig. 154 Brake Shoe Adjuster
(24) Remove the leading park brake shoe (Fig.
155) from the adapter. Leading brake shoe is
removed by rotating the bottom of the brake shoe
inward (Fig. 155) until the top of the brake shoe can
be removed from the brake shoe anchor. Then remove
the upper return springs (Fig. 155) from the leading
brake shoe.
Fig. 155 Primary Brake Shoe Remove/Install
(25) Remove the upper return springs (Fig. 156)
from the trailing park brake shoe.
(26) Remove the hold down spring and pin (Fig.
157) from the trailing park brake shoe.
(27) Remove the trailing park brake shoe from the
adapter.
(28) Remove the park brake shoe actuator from
the adapter and inspect for signs of abnormal wear
and binding at the pivot point.
Fig. 156 Upper Return Springs
Fig. 157 Trailing Brake Shoe Hold Down Pin And
INSTALL
(1) Install the trailing brake shoe on the adapter.
NOTE: When the hold down pin is installed, the
long part of the hold down pin is to be positioned
strait up and down. This will ensure that the hold
down pin is correctly engaged with the adapter.
(2) Install the hold down spring and pin (Fig. 157)
on the trailing park brake shoe.
(3) Install the upper return springs (Fig. 156) on
the trailing park brake shoe.
(4) Install the upper return springs on the leading
park brake shoe (Fig. 155). Then position the top of
the leading park brake shoe at the upper anchor and
rotate the bottom of the shoe outward until correctly
installed on the adapter.
(5) Install the adjuster (Fig. 154) between the
leading and trailing park brake shoe.
BRAKES
Spring
5 - 63