Chrysler 1998 Voyager Service Manual page 117

NS
REMOVAL AND INSTALLATION (Continued)
(7) Remove the brake shoe to brake shoe lower
return springs (Fig. 64) and (Fig. 65).
Fig. 64 Remove/Install Brake Shoe Lower Return
Fig. 65 Brake Shoe Lower Return Spring
(8) Remove the tension clip (Fig. 66) attaching the
upper return spring to the automatic adjuster assem-
bly.
(9) Remove the brake shoe to brake shoe upper
return spring (Fig. 67).
(10) Remove the trailing brake shoe assembly to
brake support plate hold down spring and pin (Fig.
68) from the brake shoe assembly.
(11) Remove the trailing brake shoe assembly from
the brake support plate, park brake actuating lever
and park brake actuating strut (Fig. 69). Remove the
automatic adjuster assembly from the leading brake
shoe.
(12) Remove the leading brake shoe assembly to
brake support plate hold down spring and pin (Fig.
70) from the brake shoe. Remove the leading brake
shoe from the brake support plate.
Spring
Fig. 66 Tension Clip Attachment To Adjuster
Fig. 67 Brake Shoe Upper Return Spring
Fig. 68 Trailing Brake Shoe Hold Down Spring And
(13) Remove the park brake actuator (Fig. 71)
from the leading brake shoe and transfer to the
replacement brake shoe.
BRAKES
Pin
5 - 35