Chrysler 1998 Voyager Service Manual page 476

8L - 24 LAMPS
REMOVAL AND INSTALLATION (Continued)
(3) Position courtesy lamp to liftgate trim panel.
(4) Press courtesy lamp into trim panel until tabs
engage fully to trim panel.
LIFTGATE COURTESY LAMP BULB
REMOVAL
(1) Remove liftgate courtesy lamp.
(2) Insert a small, flat bladed pry tool between
courtesy lamp lens and courtesy lamp body.
(3) Carefully depress tabs holding lens to courtesy
lamp body (Fig. 21).
(4) Remove lamp lens from lamp body.
(5) Carefully press lamp bulb contact toward oppo-
site contact.
(6) Remove bulb from lamp body.
INSTALLATION
(1) Carefully press lamp bulb contact toward oppo-
site contact.
(2) Position bulb to lamp bulb contacts.
Fig. 21 Liftgate Courtesy Lamp Bulb
(3) Position long side of lamp lens to tabs on lamp
body.
(4) Press on center of lens to engage tabs on oppo-
site side of lamp body.
(5) Install liftgate courtesy lamp.
NS