Lower Console; Lower Instrument Panel - Chrysler 1998 Voyager Service Manual

8E - 26 INSTRUMENT PANEL AND SYSTEMS
REMOVAL AND INSTALLATION (Continued)
(3) Remove reinforcement.
INSTALLATION
(1) Place reinforcement in position.
(2) Install screws to hold knee blocker reinforce-
ment to instrument panel.
(3) Install lower steering column cover.

LOWER CONSOLE

REMOVAL
(1) Remove screws holding lower console to floor
bracket and instrument panel (Fig. 40).
Fig. 40 Lower Console
(2) Slide console rearward from around instrument
panel supports.
(3) Remove lower console.
INSTALLATION
(1) Place lower console in position.
(2) Slide console forward around instrument panel
supports.
(3) Install screws to hold lower console to floor
bracket and instrument panel.

LOWER INSTRUMENT PANEL

REMOVAL
(1) Remove right end cover.
(2) Remove steering column bezel.
(3) Remove radio bezel and HVAC control.
(4) Remove lower console.
(5) Remove ash receiver cup holder and track.
(6) Remove glove box.
(7) Remove glove box latch striker.
(8) Remove glove box lamp.
(9) Disconnect wire connector from glove box lamp.
(10) Remove screws holding lower instrument
panel to reinforcement frame around glove box open-
ing (Fig. 41).
Fig. 41 Lower Instrument Panel
NS/GS