Chrysler 1998 Voyager Service Manual page 518

8Q - 4 VEHICLE THEFT SECURITY SYSTEM
REMOVAL AND INSTALLATION (Continued)
SLIDING DOOR AJAR (VTSS TRIGGER) SWITCH
REMOVAL
(1) Release the sliding door latch and allow back of
the door to pop open.
(2) Through opening at the rear edge of the sliding
door on outside of the vehicle, pry door ajar switch
from quarter panel opening (Fig. 7).
(3) Disconnect the wire connector from the back of
the ajar switch.
(4) Remove the sliding door ajar switch.
INSTALLATION
For installation, reverse the above procedure.
Fig. 7 Sliding Door Ajar Switch
NS