Chrysler 1998 Voyager Service Manual page 244

Table of Contents

Advertisement

7 - 4
COOLING SYSTEM
DESCRIPTION AND OPERATION (Continued)
Fig. 7 Water Pump—2.0L Gasoline Engine
Fig. 8 Water Pump—2.0L Gasoline Engine
Fig. 9 Water Pump—2.5L VM Diesel
THERMOSTAT OPERATION
2.5 VM DIESEL
The engine cooling thermostats are wax pellet
driven, reverse poppet choke type. They are designed
to provide the fastest warm up possible by prevent-
ing leakage through them and to guarantee a mini-
mum engine operating temperature (Fig. 10). The
thermostat has a hole to bleed off air in the cooling
system during engine warm up. The thermostat
begins to open at 80° C
2° (176° F
4°).
Fig. 10 Thermostat and Housing — 2.5L VM Diesel
PRESSURE/VENT CAP
WARNING: Engine coolant can reach temperatures
of 200° fahrenheit or greater. If the cooling system
is opened with coolant at a high temperature, hot
coolant can be forced out of the system under high
pressures, causing personal injury. Allow system to
cool down prior to removing the pressure cap.
The pressure/vent cap is secured to the coolant
tank neck by a means of a cam lock system. This cap
releases excess pressure at some point within a
range of 90-117 kPa (13- 17 psi) for gasoline engines,
and 110–124 kPa (16–18 psi) for diesel engines. The
actual pressure relief point (in pounds) is labeled on
top of the cap (Fig. 11).
The cooling system will operate at pressures
slightly above atmospheric pressure. This results in a
higher coolant boiling point allowing increased radi-
ator cooling capacity. The cap (Fig. 11) contains a
spring-loaded pressure relief valve. This valve opens
when system pressure reaches approximately 103
kPa (15 psi).
When the engine is cooling down, vacuum is
formed within the cooling system. To prevent collapse
of the radiator and coolant hoses from this vacuum, a
vacuum valve is used within the cap. This valve pre-
vents excessive pressure differences from occurring
between the closed cooling system and the atmo-
sphere. If the vacuum valve is stuck shut, the radia-
tor and/or cooling system hoses will collapse on cool-
down.
NS/GS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents