Chrysler 1998 Voyager Service Manual page 118

5 - 36 BRAKES
REMOVAL AND INSTALLATION (Continued)
Fig. 69 Trailing Brake Shoe Removal/Installation
Fig. 70 Leading Brake Shoe Hold Down Spring And
Fig. 71 Park Brake Actuator Plate
Pin
INSTALL
(1) Lubricate the eight shoe contact areas on the
support plate and anchor, (Fig. 72) using the
required special Mopar
4796269.
Fig. 72 Brake Support Plate Contact Areas
(2) Install leading brake shoe on brake support
plate. Install the leading brake shoe hold down
spring and pin (Fig. 70) on the brake shoe.
(3) Install the park brake actuator strut (Fig. 73)
on the leading brake shoe. Then install the park
brake actuator lever on the strut (Fig. 73).
Fig. 73 Park Brake Components Assembled On
Leading Brake Shoe
(4) Install the automatic adjuster screw on the
leading brake shoe. Then install the trailing brake
shoe on the park brake actuating lever and park
brake actuating strut (Fig. 69). Position trailing
brake shoe on brake support plate.
(5) Install the brake shoe hold down pin and
spring on the trailing brake shoe (Fig. 68).
(6) Install the brake shoe to brake shoe upper
return spring (Fig. 67).
NS
Brake Lubricant, P/N