Vacuum Reseroir; Vehicle Speed Sensor - Chrysler 1998 Voyager Service Manual

8H - 10 VEHICLE SPEED CONTROL SYSTEM
REMOVAL AND INSTALLATION (Continued)
Fig. 12 Speed Control Cable
STEP IS NOT DONE A DIAGONSTIC TROUBLE
CODE (DTC) MAY BE SET.

VACUUM RESEROIR

REMOVAL
(1) Disconnect negative cable from battery.
(2) Remove battery, Refer to Group 8B, for Battery
Removal/Installation
(3) Remove battery tray.
(4) Disconnect vacuum hoses from vacuum reser-
voir
INSTALLATION
(1) Connect vacuum hoses to vacuum reservoir.
(2) Install battery tray
(3) Install battery, Refer to Group 8B, for Battery
Removal/Installation.
(4) Connect negative cable to battery.

VEHICLE SPEED SENSOR

For Removal/Installation, refer to Vehicle Speed
Sensor in Group 14, Fuel Injections.
NS