Chrysler 1998 Voyager Service Manual page 460

8L - 8 LAMPS
ADJUSTMENTS (Continued)
(3) Tighten screws to hold magnifying window to
headlamp module. Do not over tighten.
Fig. 5 Magnifying Window and Bubble Level
Calibration
FOG LAMP ALIGNMENT
Prepare an alignment screen. Refer to the Align-
ment Screen Preparation paragraph in this section. A
properly aligned fog lamp will project a pattern on
the alignment screen 100 mm (4 in.) below the fog
lamp center line and straight ahead (Fig. 6). To
improve visual interpretation of the fog lamp pattern
on the alignment screen, disable the headlamps by
disengaging the wire connectors from the headlamp
bulbs.
The Town and Country fog lamp adjustment screw
is located through the lens (Fig. 7).
Fig. 6 Fog Lamp Alignment
Fig. 7 Fog Lamp Adjustment Screw
NS