Chrysler 1998 Voyager Service Manual page 558

8V - 8 OVERHEAD CONSOLE
REMOVAL AND INSTALLATION (Continued)
Fig. 9 Overhead Console
Fig. 10 Reading/Courtesy lamp lens
Fig. 11 Socket and Lamp
(1) Disconnect and isolate negative battery cable.
(2) Open transmitter bin door in rear of overhead
console.
Fig. 12 Reading/Courtesy Lamp
Fig. 13 Connector and Switch
(3) Gently pull towards rear of vehicle, releasing
transmitter bin door.
(4) Disconnect harness connector from Universal
Transmitter and remove bin door from vehicle.
INSTALLATION
For installation, reverse the above procedures. The
Universal Transmitter will need to be retrained.
Refer to SERVICE PROCEDURES in this section.
NS