Chrysler 1998 Voyager Service Manual page 485

NS/GS
ADJUSTMENTS (Continued)
To adjust headlamp alignment, rotate alignment
screws to achieve the specified low beam hot spot
pattern (Fig. 2).
Fig. 2 Headlamp Adjusters—Left Side Shown
FOG LAMP ALIGNMENT
Prepare an alignment screen. Refer to the Align-
ment Screen Preparation paragraph in this section. A
properly aligned fog lamp will project a pattern on
the alignment screen 200 mm (8 in.) below the fog
lamp centerline and straight ahead (Fig. 3). To
improve visual interpretation of the fog lamp pattern
on the alignment screen, disable the headlamps by
disengaging the wire connectors from the headlamp
bulbs.
Fig. 3 Fog Lamp Alignment
LAMPS 8L - 7