About This Guide; Conventions - 3Com SuperStack II PathBuilder S330 Reference Manual

Conventions

A T
BOUT HIS
This guide describes how to install, configure, and manage the SuperStack
™
PathBuilder S330 and SuperStack II PathBuilder S310 WAN access switches
(PathBuilder S330/S310 switch).
This guide is intended for network administrators, system engineers, field
engineers, and other personnel responsible for installing, configuring, and
managing PathBuilder products.
If release notes are shipped with your product and the information there differs
from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat Reader
Portable Document Format (PDF) or HTML on the 3Com World Wide Web site:
http://www.3com.com/
Table 1 and Table 2 list conventions that are used throughout this guide.
Table 1 Notice Icons
Icon Notice Type
Information note
Caution
Warning
Table 2 Text Conventions
Convention Description
This typeface represents information as it appears on the screen.
Screen displays
The word "syntax" means that you must evaluate the syntax provided
Syntax
and then supply the appropriate values for the placeholders that
appear in angle brackets. Example:
In this example, you must supply a port number for <port>.
The word "command" means that you must enter the command
Commands
exactly as shown and then press Return or Enter. Commands appear in
bold. Example:
(continued)
G
UIDE
Description
Information that describes important features or instructions
Information that alerts you to potential loss of data or potential
damage to an application, system, or device
Information that alerts you to potential personal injury
To enable RIPIP, use the following syntax:
SETDefault !<port> -RIPIP CONTrol = Listen
To remove the IP address, enter the following command:
SETDefault !0 -IP NETaddr = 0.0.0.0
® II