Table of Contents
Advertisement
218
A
A: S
PPENDIX
YSTEM
PathBuilder S310
Specifications
S
P
N
PECIFICATIONS AND
ART
UMBERS
Table 16 lists complete specifications for the PathBuilder S310 WAN access switch.
Table 16 PathBuilder S310 System Specifications
SYSTEM SPECIFICATIONS
Ethernet 10BASE-T
V.35/RS422
T1/E1 UNI
Mechanical:
Shelf dimensions
19 in. rack mountable
Rack mount spacing
Cooling
Unit weight (approx.)
Shipping weight (approx.)
Input power requirements
Power consumption
Maximum current
Environmental:
Operating temperature
Storage temperature
Humidity
Altitude
Regulatory compliance
Safety
Emissions
STANDARDS
ATM Forum
ANSI
TIA/EIA
AT&T
Frame Relay Forum
IETF RFCs
(continued)
1 (2 when Ethernet 10/100 module is installed)
1
1
8.9 cm H x 43.2 cm x W x 38.7 cm D
(3.5 in. H x 17 in. W x 15.25 in. D)
Yes (with brackets)
2 RMS
2 fans @ 37 CRM each (deregulated 20%)
6.75 kg (15.00 lb) per shelf
9.00 kg (20.00 lb) per shelf
90-264 VAC, 50-60 Hz (110/220 self sensing),
standard grounded outlet or -42 to -60 VDC
60 watts typical, 90 watts max
1.5A @110VAC
0.75A @ 220VAC
3A @ 48VDC
0 °C to 45 °C (0 °F to 113 °F)
-40° to 70°C (-40 °F to 158°F)
95% @ 40°C ( 104 °F), non-condensing
14000 ft.
UL listed (1950, 3rd edition)
CSA 22.2
EN60950
FCC Part 68
FCC Part 15, Class A
EN 50082
EN 55022, Class A
UNI 3.x, T1/E1 CES 2.0, IMA, ATM DXI 1.0
T1.403, T1.617 Annex D
EIA -232, EIA-574, RS-366/422/423/449
Pubs 54016 and 62411
FRF.5, FRF.8, FRF.11
1213, 1211, 1483, 1490, 1406, 1493 (bridge MIB),
1577 (2225, IP over ATM), 1643 (Ethernet MIB)
Advertisement
Table of Contents
