Configuring Trap Clients - 3Com SuperStack II PathBuilder S330 Reference Manual

52 C 3: G S
HAPTER ETTING TARTED
Configuring Trap Clients
Trap clients are the network management stations to which you want the
PathBuilder S330/S310 switch to send traps. You can specify up to four trap
clients. To configure trap clients:
1 From the Manage IP Network Configuration menu, select [2] Trap Client
Configuration to open the Trap Client Configuration menu, shown in Figure 48.
Figure 48 Trap Client Configuration Menu
2 Select the number corresponding to the trap client you want to configure.
Figure 49 shows the menu for configuring trap client 1.
Figure 49 Trap Client 1 Configuration Menu