Table of Contents
Advertisement
216
A
A: S
PPENDIX
YSTEM
S
P
N
PECIFICATIONS AND
ART
UMBERS
Table 15 PathBuilder S330 System Specifications (continued)
Serial Interface
Number of ports
Interface type
Data support
ATM support
Clock
Shaping
Data rates:
Minimum
Maximum
Maximum cable length
Clock outputs
Connector type on unit
Connector type on V.35 cable
converter
Connector type on RS-422 cable
converter
Connector type on EIA530 cable
converter
Connector type on X.21 cable
converter
CBR MODULE SPECIFICATIONS
Number of ports
Interface type(s)
T1-DSX/E1 physical
Impedance
Framing
Line Coding
LBO
Serial
Clock
Front panel LEDs (1-3)
Data rates
ATM support
Timing
Cell Delay Variation Tolerance
Class of Service
T1-DSX/E1connector type
Connector type at end of
V.35/RS-366 cable
(continued)
1
HD 60-pin (DCE or DTE), female; V.35/RS-449/EIA530
(through cable converters)
Transparent HDLC/SDLC, Frame Relay, ATM DXI
AAL5
DCE or DTE, Internal or external (smooth clock)
VC level, dual leaky bucket
56 Kbps to 6 Mbps
56 Kbps
6 Mbps
50 ft @ 8 Mbps
Smooth clocks on transmit and receive lines to DTE
MOLEX 60-pin female
35-pin Winchester
female for DCE, male for DTE
DB-37 subminiature
female for DCE, male for DTE
DB-25 subminiature,
female for DCE, male for DTE
DB-15 subminiature,
female for DCE, male for DTE
4
3 direct T1-DSX/E1, 1 DSU/CSU
3 each RJ48
100 Ohms
D4 or ESF
AMI or B8ZS
0 to 655 ft
HD-pin; V.35/RS-449/EIA530/X.21
DCE, Internal
ALARM, Inservice
n x 56 Kbps or n x 64 Kbps
(structured; n = 1, 2, 3, 4, 6, 8, 12, 24) or
1.544 Mbps (unstructured)
CAS/CCS support with dynamic bandwidth allocation
AAL1, ATM CES 2.0
Looped, system, adaptive, SRTS
24 ms (T1-DSX), 32 ms (E1)
CBR
RJ48 or G703 coax with E1 Balun Adapter
DB-25 subminiature,
female for DCE, male for DTE
Advertisement
Table of Contents
