Table of Contents
Advertisement
154
C
4: C
HAPTER
ONFIGURING
Modifying Existing
Virtual Circuits
P
B
S330/S310 M
ATH
UILDER
ODULES
3 Enter the number corresponding to the port or group for which you want to view
virtual circuits to open the Access Virtual Circuits by Port/Group screen, shown in
Figure 143.
Figure 143 Access Virtual Circuits by Port/Group Screen
The Access Virtual Circuits by Port/Group screen provides the same information as
the List Virtual Circuit screen. See "Viewing Virtual Circuits for the Entire Chassis"
earlier in this section for details.
To view detailed information about one of the listed circuits, enter the desired
VC#. A prompt appears at the bottom of the screen. This prompt lists the selected
circuit and provides you a list of options:
Enter
to open the Access Virtual Circuits by Port/Group detail screen. This
1
screen provides the same information as the List Virtual Circuits Detail screen,
shown earlier in Figure 141. See "Viewing Virtual Circuits for the Entire
Chassis" earlier in this section for details.
Enter
to view statistics for the selected circuit.
s
Enter
to delete the circuit.
d
Enter
to modify the circuit.
m
To modify an existing virtual circuit:
1 From the Virtual Circuit menu, select [3] Modify Virtual Circuit. The Modify Virtual
Circuit selection screen appears. This screen displays a list of existing virtual
circuits.
2 Enter the VC# of the circuit you want to modify.
The following prompt appears:
Enter Description (12 characters maximum): <circuit description>
where
<circuit description>
3 If desired, change the circuit description by backspacing and typing over the
existing description; otherwise, press [Return] to change other circuit parameters.
, P
,
A
ORTS
AND
PPLICATIONS
is the Description for the selected circuit.
Advertisement
Table of Contents
