Table of Contents
Advertisement
Step 3: Connect AC or
DC Power and
(optionally) the RPS
System
Figure 19 Rack Mounting Ear Configuration
!
Caution:
One rack unit space
required above
and below the
unit for clearance.
3 Support the shelf in its mounting place and attach the mounting hardware.
You connect the AC/DC power at the rear of the PathBuilder S330/S310 switch.
Table 3 outlines the specifications for the AC/DC Source.
Table 3 AC/DC Source Specifications
Input Power
Requirements
Power Consumption
Maximum Current
PathBuilder S330/S310
(mounting brackets required)
90-264 VAC, 50-60Hz, standard grounded
outlet
-42 to -60 VDC, Optional
AC: 14 AWG wire, Belden type 19364
DC: minimum 14 AWG wire, listed type
TC tray cable with three conductors
60 Watts typical, 90 Watts maximum
1.5 A @ 110VAC
0.75A @ 220VAC
3A @ 48VDC
Installation Procedures
19"
25
2 Rows
3.5"
Advertisement
Table of Contents
