3Com SuperStack II PathBuilder S330 Reference Manual page 116

102 C 4: C
HAPTER ONFIGURING
P B S330/S310 M
ATH UILDER ODULES
To configure the bridge:
1 From the Configuration Management menu, select [3] Manage Bridge to open the
Manage Bridge menu, shown in Figure 91.
Figure 91 Manage Bridge Menu
2 From the Manage Bridge menu, select [1] Bridge Configuration to open the Bridge
Configuration menu, shown in Figure 92. The current aging timer setting is
displayed below the menu title (3 minutes in the sample menu shown in the
figure).
Figure 92 Bridge Configuration Menu
3 Select [1] Set Aging Timer. The following prompt appears at the bottom of the
screen:
Enter Aging Timer (minute):
4 Enter the desired timer interval, in minutes.
, P , A
ORTS AND PPLICATIONS