Table of Contents
Advertisement
Using the Menus
Navigating Through the
Menus
Figure 38 PathBuilder S330/S310 Main Menu
Use the options on the main menu as follows:
Select [1] System Administration to access common parameters.
Select [2] Configuration Management to view or set configuration parameters
for cards, ports, PVCs, video dialup, and other hardware and software features.
Select [3] Fault Management to view or acknowledge alarms and set
loopbacks.
Select [4] Performance Management to view statistical data.
Select [5] Exit to log out.
The title of the menu or display appears at the top of the screen. Your access
status appears in the upper righthand corner.
Read-Write means that you have Read-Write control of the PathBuilder
S330/S310 and can make changes to the system.
Read Only means that you can only monitor the menus and displays.
Only one Read/Write session is allowed at any given time. The first session is the
Read/Write session. Subsequent simultaneous sessions are Read Only.
You select a menu option by typing the selection number and pressing [Enter].
Displays that contain information and no selections include the prompt:
Press Esc for previous menu
Multi-page displays also prompt you to press "N" for the next page or "P" for the
previous page.
Only the main menu contains the Exit selection to log out. Selecting Exit returns
you to the title screen with the password prompt. All other menus have a Previous
menu selection which returns you to the main menu one screen at a time. You can
also press [Esc] to move back one menu at a time.
Using the Menus
43
Advertisement
Table of Contents
