3Com SuperStack II PathBuilder S330 Reference Manual page 92

78 C 4: C
HAPTER ONFIGURING
P B S330/S310 M
ATH UILDER ODULES
Figure 68 T1 (DS1) UNI Port Selection Menu
4 Select the number corresponding to the T1/E1port you want to configure to open
the Port Configuration menu. Figure 69 shows a T1 (DS1) UNI Port Configuration
menu. The E1 UNI Port Configuration menu is similar.
Figure 69 Configuring a T1/E1 Port
The Port Configuration menu lists the current parameters for the selected T1/E1
port and provides options for changing the settings.
5 Change any of the following information (by selecting the appropriate options
and responding to the prompts that appear at the bottom of the screen) to
configure the selected T1/E1 port:
Application — The application:
CSU — Straight T1, long haul (up to 2,000 feet)
DSX — Short haul T1 (up to 655 feet)
, P , A
ORTS AND PPLICATIONS