Adding Virtual Circuits - 3Com SuperStack II PathBuilder S330 Reference Manual

130 C 4: C
HAPTER ONFIGURING

Adding Virtual Circuits

P B S330/S310 M
ATH UILDER ODULES
To define a virtual circuit:
1 From the Configuration Management menu, select [2] Manage Circuit to open the
Virtual Circuit Menu, shown in Figure 119.
Figure 119 Virtual Circuit Menu
2 Select [2] Add Virtual Circuit. The Add Virtual Circuit screen appears as shown in
Figure 120.
Figure 120 Initial Add Virtual Circuit Screen
3 Enter a description for the virtual circuit you are defining.
We recommend that you do not use the description
description that the system assigns to video virtual circuits when they are
activated.
, P , A
ORTS AND PPLICATIONS
. This is the default
<366 call>