Table of Contents
Advertisement
Chapter 2 Set Up the Rack
Figure 4 Connection bracket installation
Legend
3 Insert an M8 hex screw through the hole in one of the bracket corners.
4 Loosely screw the M8 screw into the threaded hole in the frame.
5 Insert an M8 hex screw through one of the other corner holes in the bracket
and loosely screw it into the threaded hole in the frame.
6 Repeat Step 5 for the other two corner holes.
7 Tighten the screws after all the bay connections are in place.
Attach the Baying Plates
Baying plates bind two Pillar racks together at the roof and bottom of the rack.
Tip: Use the stabilizer plate in conjunction with the baying kit that comes with
each rack.
Rack Position
1 Frames
2 Baying connection bracket
3 M8 hex screws
31
Advertisement
Table of Contents
