Table of Contents
Advertisement
Appendix A Slammer LED Startup Progress Codes
About Slammer LED Codes
The Slammer bezel has Fault, Status, and Activity LEDs that can display various
colors and blink rates. These LEDs also appear on the private interface module
at the back of the Slammer chassis, and are labeled FLT (Fault), ACT (Activity),
and ST (Status).
These LEDs can:
● Be green or amber.
● Be on or off.
● Be steady, with no blinks.
● Blink rapidly—slightly more than two blinks for each sec (2.375Hz).
● Blink slowly—one blink for each 1.5 sec (0.67Hz).
About Slammer LED Codes
155
Advertisement
Table of Contents
