Table of Contents
Advertisement
Chapter 6 Complete the Installation
About HBA Driver and Firmware Installation (SAN Only)
You must install FC HBAs in the SAN hosts, including any software required by
the HBAs, before you can access the LUNs on Pillar Axiom 600 servers.
Complete the instructions from your HBA vendor to:
● Install the HBAs in the SAN hosts.
● Download required drivers and firmware.
● Install or update the computer BIOS on the SAN host, if required.
Note: Each 8 Gb/s Fiber Channel (FC) HBA has its own unique World Wide
Name (WWN). This WWN must be used when updating the FC switch
configuration and installing or replacing the 8 Gb/s FC HBA.
Note: If you intend to install the Pillar Axiom Path Manager software, refer to the
appropriate
your particular platform.
Related concepts
About Pillar Axiom Path Manager Installation (SAN Only)
•
About HBA Driver and Firmware Installation (SAN Only)
Pillar Axiom Path Manager Installation Guide and Release Notes for
140
Advertisement
Table of Contents
