Table of Contents
Advertisement
Chapter 2 Set Up the Rack
Prepare the Racks
To create a bay of Pillar racks, first remove the adjacent (inner) side panels from
each rack (see the following figure) and move the racks into position. You will
route the cables directly from one rack to the other through the open sides of the
racks because the cables are not long enough to route through a raised floor.
Figure 2 Sample 42U side panels
Legend
1 If locked, unlock the side panel using the supplied keys.
2 Unlatch the side panel by:
3 Remove the side panel and set it aside.
Rack Position
1 Side panel, one on each side
2 Latches
● Pushing the release button, or
● Lifting the release handles.
29
Advertisement
Table of Contents
