Table of Contents
Advertisement
Chapter 1 Before You Begin
Table 6 Required equipment and supplies
On hand?
Customer-Supplied Equipment and Tools
Item
At least two power sources on
independent circuits with
appropriate connectors for the
voltage and amperage ratings
Copper Ethernet switch with
two open 10/100 ports
Two Category 5 100BaseT
cables
For each NAS Slammer, two to
four GbE capable (copper or
optical) cables
For each NAS Slammer, a
copper or optical Ethernet
switch with at least two open
GbE ports
For each SAN Slammer, two to
four SAN Fiber-optic cables
For each SAN Slammer, two to
four open ports on the SAN fabric
Workstation on the same LAN
as the Pilot and with a
supported browser
Purpose
Provide power to the PDUs.
Pillar Axiom 600 systems
require redundant power
supplies from two PDUs on
separate input circuits.
Connect Pilot management
ports to the Ethernet LAN.
Connect Pilot management
ports to the Ethernet switch.
Connect NAS Slammer network
data ports to the LAN.
Each NAS Slammer has four
network data ports. At least one
port for each Slammer control
unit (CU) must be connected.
Connect SAN Slammer data
ports to the fabric.
Each SAN Slammer has four
data ports. At least one port for
each Slammer CU must be
connected.
Connect to the Pillar Axiom
Storage Services Manager to
carry out the final installation
tasks.
24
Advertisement
Table of Contents
