Figure 59 Dc Power Switch At The Back Of The Pilot; Table 23 Leds On The Slammer Bezel - Oracle Pillar Axiom 600 Hardware Installation Manual

Chapter 6 Complete the Installation

Figure 59 DC power switch at the back of the Pilot

Legend
Note: This image is for illustration purposes only. Your hardware
component might look different.
3 Verify that the Slammer STATUS LEDs are green and not blinking. Use the
table below for information on the Slammer bezel LEDs.

Table 23 LEDs on the Slammer bezel

Verify the Front Status LEDs
1 Pilot power switch
2 Ethernet ports
Status Activity
Green Off
Green Variable
green
Variable Variable
Fault Software
module
Off DMS
Off Various
On DMS
Meaning
System is normal
with no activity.
System is normal
and displays some
activity. Higher the
activity, faster is
the blinking of the
Activity LED.
Fault LED is turned
on due to various
hardware errors,
such as:
● The bezel is
not detected
129