Table of Contents
Advertisement
Chapter 6 Complete the Installation
Attach the Rack Side Panels
1 Hang the top of the panel on the top of the rack frame and latch the panel to
close it. If the racks are bayed, you must install only the outer two panels.
Important! Be sure not to pinch any cables that might have strayed from
their proper moorings.
2 Secure the panel appropriately using one of the following options:
3 Lock both side panels (optional).
Attach the Rack Side Panels
● Engage the latch handle(s) and snap the panel into place.
● Screw the panels to the rack frame at the top and bottom.
143
Advertisement
Table of Contents
