Chapter 2 Set Up the Rack
Figure 6 Adjacent anchor bolts at the front of the racks
Legend
7 Hold the baying plate across the two anchor-bolt holes and loosely replace
the anchor bolts.
8 Repeat Steps 6 and 7 in the back of the racks.
9 Use the socket wrench to tighten the connection bracket screws.
10 Use the T30 Torx-head screwdriver to tighten the top baying plate screws.
11 Use the 3/4-inches (19-millimeters) open-end wrench to tighten the bottom
baying plate anchor bolts.
Related tasks
Install a Stabilizer Plate (Optional)
•
Adjust the Leveling Legs
Racks have built-in leveling legs at each corner. Adjust these legs so they are in
firm contact with the floor and the rack is level. If the rack connects to others,
adjust the legs so the racks are at the same height and can be bolted together.
Rack Position
1 Anchor bolts
33