Table of Contents
Advertisement
Chapter 7 Initial Configuration
Figure 67 Pillar Axiom Storage Services Manager log in screen
5 For Axiom name, specify the Pillar Axiom system to which you want to connect.
Valid values:
6 Log in as the Primary administrator.
Valid values:
7 Click Login.
8 When prompted, enter a new password.
Note: Get the password that is to be used from the
Survey . Be sure that the Primary system administrator also gets this
password.
Note: We strongly recommend that you set up an additional Type 1
Administrator account when you install the system. A Type 1 Administrator
can modify account passwords without knowing the previous password for
any accounts.
Note: Do not lose the password. If you lose the password, contact the Pillar
World Wide Customer Support Center for assistance.
9 Check the system status.
Start the Graphical User Interface
● IP address of the Pilot management controller.
● Name of the Pillar Axiom system as configured in your site naming
services for the Pilot.
● Login name: administrator
● Password: pillar
Site Preparation
147
Advertisement
Table of Contents
