Table of Contents
Advertisement
Chapter 4 Connect Data Cables
Connect the Pilot CUs
Connect the two control units (CUs) of the Pilot to each other to ensure a heartbeat.
Prerequisites:
● One serial null modem cable
● One 0.5 meter Cat 5e Ethernet cable
1 Connect one end of the serial null modem cable to the bottom Serial port of
the Pilot CU 0 (the top CU). Connect the other end of the serial null modem
cable to the bottom Serial port of the Pilot CU1 (the bottom CU). This
creates a heartbeat connection between the two CUs of the Pilot.
Figure 45 Pilot CU cabling
Legend
Note: This image is for illustration purposes only. Your hardware
component might look different.
Connect the Pilot CUs
1 Pilot CU0
2 Serial port
3 USB port
4 Ethernet port
5 Pilot CU1
110
Advertisement
Table of Contents
