Using Vlan 1 As Shown In Various Examples In The Documentation Generates Error Codes (6968484); When Multiple Configuration Scripts Are Run In Parallel, Sefos Application Can Crash (6936742); Unlit Link And Activity Leds For The Sfp+ Ports (6873825); The Switch Command Line Option Is Unsupported - Oracle Sun Blade 6000 Product Notes

Known Issues
Using vlan 1 as Shown in Various Examples in the
Documentation Generates Error Codes (6968484)
Workaround: Instead of using vlan 1 as shown in the product documentation, use any unused
VLAN.
When Multiple Configuration Scripts Are Run in
Parallel, SEFOS Application Can Crash (6936742)
The current release of the SEFOS configuration and management application doesn't support
multiple, concurrent updates to the configuration database.
Workaround: Multiple SEFOS login sessions are allowed to read the system status at any time,
however, use only one of these sessions to configure and update the NEM.
Unlit Link and Activity LEDs for the SFP+ Ports
(6873825)
Unlit Link and Activity LEDs for the SFP+ ports might appear partially lit when the LEDs are
viewed from an angle.
Workaround: View the LEDs directly from the front of the unit.

The switch Command Line Option Is Unsupported

The switch option in various commands is not supported when you are connected to SEFOS.
In the SEFOS documentation, disregard the switch option listed in any command and disregard
any output examples that show multiple instances. Output examples that show a single instance
are valid in SEFOS.

SSL V3.0 POODLE DISABLE SSL V3 (19842641)

Workaround: Disable SSLv3 from ILOM under /SP/service/https.
cd /SP/services/https
->
/SP/services/https
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes 39