Mazda RX-8 Workshop Manual page 1497

< Previous Next >
2011 - RX-8 - DriveLine/Axle
REAR DRIVE SHAFT INSPECTION
1. Verify that the drive shaft is not twisted or damaged.
If there is any malfunction, replace the applicable part.
2. Inspect the dust boot for damage and cracks.
If there is any malfunction, replace the applicable part.
3. Move the spline and joint up and down, left and right by hand and verify that there is no
roughness.
If there is any malfunction, replace the applicable part.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
Back to Top