Mazda RX-8 Workshop Manual page 1548

< Previous Next >
2011 - RX-8 - DriveLine/Axle
DRIVELINE/AXLE TECHNICAL DATA
Maximum front wheel bearing play
Maximum rear wheel bearing play
Differential oil grade/viscosity
Differential oil capacity (approx. quantity)
Differential pinion height
Differential drive pinion preload
Backlash of drive gear and ring gear
Propeller shaft maximum runout
Propeller shaft initial torque (Reference value)
Rear drive shaft standard length
Left side 792.6—802.6 mm {31.21—31.59 in}
Item
0.05 mm {0.002 in}
0.05 mm {0.002 in}
API service GL-5 (SAE 90)
API service GL-5 (SAE 80W-90)
API service GL-5 (SAE 75W-90) (Not available from Mazda)
1.2—1.4 L {1.3— 1.4 US qt, 1.1—1.2 Imp qt}
0.038 mm {0.0015 in} or less
1.3—1.7 N·m {14—17 kgf·cm, 12—15 in·lbf}
Standard: 0.09—0.11 mm {0.0035—0.0043 in}
Minimum value: 0.05 mm {0.0020 in} or more
Variance: 0.07 mm {0.0028 in} or less
0.6 mm {0.024 in}
0.29—0.98 N·m {3.0—10 kgf·cm, 2.7—8.6 in·lbf}
Specification