Mazda RX-8 Workshop Manual page 1544

< Previous Next >
2011 - RX-8 - DriveLine/Axle
PROPELLER SHAFT INSPECTION
For Carbon-Fiber Propeller Shaft
CAUTION:
Replace the propeller shaft if it is dropped.
Handle the propeller shaft with care so that the pipe is not damaged from striking
surrounding objects or other impacts.
Replace the propeller shaft if there is any chipping or warping of the pipe.
Protect the propeller shaft from damage and handle with careful attention when working.
1. Use a dial gauge to measure the runout of the propeller shaft at each position.
If it exceeds the maximum specification, replace the propeller shaft.
Propeller shaft maximum runout
0.6 mm {0.024 in}
2. Inspect the play and rotation of the joint by turning the universal joint in the directions shown
by the arrows.