Standard
32 mm {1.3 in}
2. After installing the clip, measure the outer diametric if it exceeds the specification, reinstall a new clip.
3. Apply differential oil to the differential oil seal lip.
CAUTION:
The sharp edges of the rear drive shaft can slice or puncture the oil seal Be careful not to damage the oil seal when
installing the rear drive shaft from the rear differential.
4. Insert the rear drive shaft into the rear differential with the clip opening facing upward.
5. After installation, verify that the rear drive shaft is securely held by the clip by pulling the outer ring on the differential side
towards the axle.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
Back to Top